NBC-MSD/ 2,0-93E/MSD SCO

https://www.phoenixcontact.com/lt/products/1407377 Network cable - NBC-MSD/ 2,0-93E/MSD SCO - 1407377 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Network cable, Ethernet CAT5 (100 Mbps), 4-position, PUR, water blue RAL 5021, shielded, Plug straight M12 SPEEDCON / IP67, Coding: D, on Plug straight M12 SPEEDCON / IP67, Coding: D, Cable length: 2 m Key Commercial Data Packing unit 1 STK GTIN Weight per Piece (excluding packing) 112.94 g Custom tariff number 85444210 Country of origin Poland Technical data Dimensions Length of cable 2m Ambient conditions Degree of protection IP65 IP67 General data Rated current at 40°C 4A Rated voltage 250 V Number of positions 4 Signal type/category Ethernet CAT5 (IEC 11801), 100 Mbps Standards/regulations M12 connector IEC 61076-2-101 Characteristics head 1 Head type Plug straight M12 SPEEDCON / IP67 No. of positions (pin connector pattern) 4 07/18/2016   Page 1 / 6 https://www.phoenixcontact.com/lt/products/1407377 Network cable - NBC-MSD/ 2,0-93E/MSD SCO - 1407377 Technical data Characteristics head 1 Coding D (Data) Color black Material (component) CuZn (Contact) Ni/Au (Contact surface) PA (Contact carriers) TPU, hardly inflammable, self-extinguishing (Grip) Zinc die-cast, nickel-plated (Screw connection) Insulation resistance ≥ 100 MΩ Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm Ambient temperature (operation) -25 °C ... 90 °C Characteristics head 2 Head type Plug straight M12 SPEEDCON / IP67 No. of positions (pin connector pattern) 4 Coding D (Data) Color black Material (component) CuZn (Contact) Ni/Au (Contact surface) PA (Contact carriers) TPU, hardly inflammable, self-extinguishing (Grip) Zinc die-cast, nickel-plated (Screw connection) Insulation resistance ≥ 100 MΩ Insertion/withdrawal cycles ≥ 100 Ambient temperature (operation) -25 °C ... 90 °C Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Cable Cable type PUR ETHERNET 2x2 FLEX Cable type (abbreviation) 93E UL AWM style 20963 (80°C/30 V) Signal type/category Ethernet CAT5 (IEC 11801), 100 Mbps Cable structure 2x2xAWG26/7; SF/UTP Conductor cross section 2x 2x 0.14 mm² AWG signal line 26 Conductor structure signal line 7x 0.16 mm Core diameter including insulation 0.98 mm Wire colors white/orange-orange, white/green-green Twisted pairs 2 cores to the pair 07/18/2016   Page 2 / 6 https://www.phoenixcontact.com/lt/products/1407377 Network cable - NBC-MSD/ 2,0-93E/MSD SCO - 1407377 Technical data Cable Overall twist Two pairs with two fillers to the core Shielding Aluminum-coated foil, tinned copper braided shield Optical shield covering 70 % External sheath, color water blue RAL 5021 Outer sheath thickness 1.2 mm External cable diameter D 6.4 mm ±0.2 mm Minimum bending radius, fixed installation 4xD Minimum bending radius, flexible installation 8xD Tensile strength short-term/long-term ≤ 80N Cable weight 42 kg/km Outer sheath, material PUR Material conductor insulation Foamed PE Conductor material Bare Cu litz wires Standards/specifications Electrical requirements EN 50288-2-2 Insulation resistance ≥ 500 MΩ*km Loop resistance ≤ 290 Ω (per km) Cable capacity approx. 45 nF/km (at 1 kHz) Wave impedance 100 Ω ±5 Ω (at 100 MHz) Signal runtime 5.3 ns/m Coupling resistance ≤ 100.00 mΩ/m (At 10 MHz) Nominal voltage, cable ≤ 100 V (Peak value, not for high-power applications) Test voltage Core/Core 700 V (50 Hz, 1 min.) Test voltage Core/Shield 700 V (50 Hz, 1 min.) Flame resistance According to IEC 60332-1-2 in acc. to UL VW1 Halogen-free According to IEC 60754-1 Resistance to oil according to EN 60811-2-1 Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) -20 °C ... 80 °C (cable, flexible installation) Ambient temperature (installation) -20 °C ... 80 °C Ambient temperature (storage/transport) -20 °C ... 80 °C Drawings 07/18/2016   Page 3 / 6 https://www.phoenixcontact.com/lt/products/1407377 Network cable - NBC-MSD/ 2,0-93E/MSD SCO - 1407377 Schematic diagram Cable cross section Pin assignment M12 male connector, 4-pos., D-coded, male side PUR ETHERNET 2x2 FLEX [93E] Circuit diagram Dimensional drawing 2 2 4 4 Contact assignment of the M12 plugs 47,3 Ø12 3 M12 1 3 Ø14,8 1 Plug, M12 x 1, straight, shielded Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27061801 eCl@ss 6.0 27061801 eCl@ss 7.0 27061801 eCl@ss 8.0 27279218 eCl@ss 9.0 27060311 ETIM ETIM 3.0 EC001855 ETIM 4.0 EC001855 ETIM 5.0 EC001855 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 07/18/2016   Page 4 / 6 https://www.phoenixcontact.com/lt/products/1407377 Network cable - NBC-MSD/ 2,0-93E/MSD SCO - 1407377 Approvals Approvals Approvals UL Listed Ex Approvals Approvals submitted Approval details UL Listed  Accessories Accessories Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 sockets     Safety locking Locking clip - SAC-M12-EXCLIP-M - 1558988 Locking clip for the pin side of sensor/actuator cables with M12 connector and M12 connectors for assembly, for knurl diameter: 15 mm or for Allen key with a wrench size of 14 mm, prevents the disconnection of plug-in connections without tools     Screwdriver tools 07/18/2016   Page 5 / 6 https://www.phoenixcontact.com/lt/products/1407377 Network cable - NBC-MSD/ 2,0-93E/MSD SCO - 1407377 Accessories Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Tool - SAC BIT M12-D15 - 1208432 Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a knurl diameter of 15 mm, for 4 mm hexagonal drive     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 07/18/2016   Page 6 / 6